당사는 서비스 제공을 위해 쿠키를 사용하고 있습니다

당사 서비스를 사용함으로써 귀하는 쿠키 사용에 동의하게 됩니다

AT Ytong Monolithic wall - high end U=0,15 W/(m²K) d=524 mm

문서 번호: COM_AT_Y_high_end_monolithic_d_524
제조 업체: Ytong
제품군: Ytong AAC
제품 그룹: Composite
너비 (mm): 1000
높이 (mm): 1000
깊이 (mm): 524
게시 날짜: 2017-09-14
판 번호: 1
유형: 개체 (단일 개체)
다운로드 (8)
The Ytong Thermoblock (plus) is suitable for all bearing and reinforcing walls. The low dimensional tolerance and the tongue and groove profiling enable rapid processing in the thin-bed method with a joint thickness of 1 mm. The result is a high-quality and homogeneous masonry with excellent thermal insulation. Due to the low weight, aerated concrete blocks are also suitable for internal walls to be retrofitted as well as for reconstruction and renovation measures.
The ecological and non-combustible material also makes the construction materials extremely safe and allows their safe use.

Advantages:
- thermal conductivity from λ = 0.08 W/(mK)
- Homogeneous, monolithic - without additional insulation
- Provides healthy, balanced room climate
- Very high fire protection level: EI90 from 7.5 cm
- Economical and stable in value
- Ergonomic processing

Wall kit for load-bearing high End monolithic walls, made of Ytong Thermoblock plus PV 2-0,35 units d=500 mm.

Construction - U=0,15 W/(m²K)

15 mm Internal plastering (e.g. lime-gypsum-cement plaster)
500 mm Ytong Ytong Thermoblock plus PV 2-0,35 GTIN: 405464032873
6 mm Reinforcement layer plaster with mesh / reinforcement fabric
3 mm Silicone-resin plaster

During planning and bulding the masonry shall be taken into account: ÖNORM EN 1996 including the national annexes, ÖNORM B 3209, ÖNORM B 3358-4 as well as statutory and private-law regulations.

Technical characteristics of the Ytong masonry:
Converted average unit compressive strength fB = 2.5 N/mm²
Characteristic masonry compressive strength fK = 1.63 N/mm²
Characteristic initial shear strength of masonry fvk0 = 0.30 N/mm²
Calculated dead load γ = 3.78 kN/m³
Calculated thermal conductivity λ = 0.08 W/(mK)
Heat storage capacity c = 1.0 MJ/kg
Weighted sound reduction index (construction) Rw = 47.5 dB
Fire resistance class REI-M 90

The present tool supports you in the planning of masonry made of Ytong Thermoblocks, but it does not replace the own technical examination by the user with respect to the intended use and suitability. The use of the tool and changes within the tool must therefore be verified independently. The object proposed by the system must conform to local regulations. The use of the object must therefore be verified independently.


주요 자료: Autoclaved aerated concrete
보조 자료: Plaster
설계: Austria
제조: Austria

BIMobject 카테고리: Walls - External Walls
IFC 분류: Wall
UNSPSC 이름: Bricks
UNSPSC 코드: 301316
Uniclass 1.4 코드: L83122
Uniclass 1.4 설명: Wall units
Uniclass 2.0 코드: SS-25-13-50
Uniclass 2.0 설명: Masonry Wall Systems
Uniclass 2015 코드: Ss_25_13_50
Uniclass 2015 설명: Masonry wall systems
NBS Reference 코드: 25-13-50
NBS Reference 설명: Masonry Wall Systems
CSI MasterFormat 2014 Code: 04 22 26
CSI MasterFormat 2014 Title: Autoclaved Aerated Concrete Unit Masonry
OmniClass 번호: 23-13 35 21 13
OmniClass 제목: Masonry Structural Walls
CSI UniFormat II Code: B2010
CSI UniFormat II Title: Exterior Walls
이 제품은 다음에서 사용할 수 있습니다:
Europe
  • Austria

모든 BIM 객체는 실제 제조업체로부터 확인 및 승인된 실제 제품입니다