Utilizziamo i cookie per il nostro sito

Utilizzando questo sito autorizzi l'utilizzo dei cookie.

AT Ytong Monolithic wall - premium U=0,19 W/(m²K) d=424 mm

Unique ref.: COM_AT_Y_premium_monolithic_d_424
Produttore: Ytong
Famiglia prodotto: Ytong AAC
Gruppo prodotto: Composite
Larghezza (mm): 1000
Altezza (mm): 1000
Profondità (mm): 424
Data di pubblicazione: 2017-09-14
Numero edizione: 1
Tipo: Oggetto (oggetto singolo)
Download (8)
The Ytong Thermoblock (plus) is suitable for all bearing and reinforcing walls. The low dimensional tolerance and the tongue and groove profiling enable rapid processing in the thin-bed method with a joint thickness of 1 mm. The result is a high-quality and homogeneous masonry with excellent thermal insulation. Due to the low weight, aerated concrete blocks are also suitable for internal walls to be retrofitted as well as for reconstruction and renovation measures.
The ecological and non-combustible material also makes the construction materials extremely safe and allows their safe use.

Advantages:
- thermal conductivity from λ = 0.08 W/(mK)
- Homogeneous, monolithic - without additional insulation
- Provides healthy, balanced room climate
- Very high fire protection level: EI90 from 7.5 cm
- Economical and stable in value
- Ergonomic processing

Wall kit for load-bearing premium monolithic walls, made of Ytong Thermoblock plus PV 2-0,35 units d=400 mm.

Construction - U=0,19 W/(m²K)

15 mm Internal plastering (e.g. lime-gypsum-cement plaster)
400 mm Ytong Ytong Thermoblock plus PV 2-0,35 GTIN: 405464032873
6 mm Reinforcement layer plaster with mesh / reinforcement fabric
3 mm Silicone-resin plaster

During planning and bulding the masonry shall be taken into account: ÖNORM EN 1996 including the national annexes, ÖNORM B 3209, ÖNORM B 3358-4 as well as statutory and private-law regulations.

Technical characteristics of the Ytong masonry:
Converted average unit compressive strength fB = 2.5 N/mm²
Characteristic masonry compressive strength fK = 1.63 N/mm²
Characteristic initial shear strength of masonry fvk0 = 0.30 N/mm²
Calculated dead load γ = 3.78 kN/m³
Calculated thermal conductivity λ = 0.08 W/(mK)
Heat storage capacity c = 1.0 MJ/kg
Weighted sound reduction index (construction) Rw = 44.7 dB
Fire resistance class REI-M 90

The present tool supports you in the planning of masonry made of Ytong Thermoblocks, but it does not replace the own technical examination by the user with respect to the intended use and suitability. The use of the tool and changes within the tool must therefore be verified independently. The object proposed by the system must conform to local regulations. The use of the object must therefore be verified independently.


Materiale principale: Autoclaved aerated concrete
Materiale secondario: Plaster
Progettato in: Austria
Prodotto in: Austria

Categoria BIMobject: Walls - External Walls
Classificazione IFC: Wall
Nome UNSPSC: Bricks
Codice UNSPSC: 301316
Uniclass 1.4 Codice: L83122
Uniclass 1.4 Descrizione: Wall units
Uniclass 2.0 Codice: SS-25-13-50
Uniclass 2.0 Descrizione: Masonry Wall Systems
Uniclass 2015 Codice: Ss_25_13_50
Uniclass 2015 Descrizione: Masonry wall systems
NBS Reference Codice: 25-13-50
NBS Reference Descrizione: Masonry Wall Systems
CSI MasterFormat 2014 Code: 04 22 26
CSI MasterFormat 2014 Title: Autoclaved Aerated Concrete Unit Masonry
Numero OmniClass: 23-13 35 21 13
Titolo OmniClass: Masonry Structural Walls
CSI UniFormat II Code: B2010
CSI UniFormat II Title: Exterior Walls
Questo prodotto è disponibile in:
Europe
  • Austria

All BIM objects are real products from real manufacturers confirmed and approved